论坛风格切换
正版合作和侵权请联系 sd173@foxmail.com
 
  • 帖子
  • 日志
  • 用户
  • 版块
  • 群组
帖子
购买邀请后未收到邀请联系sdbeta@qq.com
  • 5530阅读
  • 22回复

[行业软件]Promis.e CONNECT Edition Update 2023 (23.00.00.046) [复制链接]

上一主题 下一主题
离线pony8000
 

发帖
53221
今日发帖
最后登录
2024-03-28
只看楼主 倒序阅读 使用道具 楼主  发表于: 2022-07-05 07:25:21

Promis.e CONNECT Edition Update 10 | 8.7 Gb
Languages Supported: english or 中文

The Bentley Electrical and Control System Design Software development team is pleased to announce the availability of Promis.e 2023 (23.00.00.046) is an intelligent 2D/3D electrical system design application that delivers projects faster and with fewer errors than traditional CAD.

Add ability to select the seed file before creating /editing a title block.
Users are able to select a seed file from templates folder of active workspaces when creating or editing a title block.
New and Changed in Promis.e 2023 (23.00.00.046)



What's New Highlights

The following items summarize the new features and enhancements in the Promis.e 2023 release.

Import Drawings New Overwrite option
When Overwrite option is enabled, the software automatically replaces existing pages active project.


Import Drawings - Enhaced interface for ProjectWise
The new interface allows you to select specific files prior to opening the Import Drawings dialog. Only the selected files are checkout and available in Import Drawings dialog. Prior to this release, Import Drawings automatically checked out all DGN documents from selected ProjectWise folder. Once all documents were successfully checked out, the Import Drawings dialog is populated.


Add ability to prompt users to assign a work order before saving a new revision in the Add New Revision dialog.
In BOM Manager, if user wants to add a new revision without adding a work order, the software will prompt that please input a valid Work Order.


Add ability to unforce wire connections by the different ways.
User is able to select different ways to unforce wire connections.
- Allow user to unforce all the force connections in a project.
- Allow user to unforce all the force connection associated with selected potential.
- Allow user to unforce all the force connection associated with selected potential group.

Add ability to maintain forced wire connections during page copy.
Users are able to choose if they maintain forced wire connections when they copy pages or not.


Enhance the destination attribute position on cable diagrams.
When cable symbol's insertion point is located to the right of the wiring diagram symbol's insertion point the following should happen:
1. Cable symbol should be mirrored "Vertically".
2. Text Justifications for any texts should be automatically changed except for any text having "Center" justification. What is Right justified should become Left Justified and vice versa.

Example cable diagram "Cable Symbol":


A = Symbol Graphics
B = Connection Point (Part of Symbol Graphics)
C = Insertion Point
D = Tag Mnemonic (Device ID)
Text Justification: Center Bottom (Center Baseline)
E = Symbol Text Attribute "Destination"
Text Justification: Right Bottom (Right Baseline)
F = Cross Reference Attribute
Text Justification: Left Top

Below image is the expected result:


A = Cable Symbol Graphics (Mirrored Vertically)
B = Connection Point (Part of Symbol Graphics) (Mirrored Vertically)
C = Cable Symbol Insertion Point
D = Tag Mnemonic (Device ID)
Text Justification: Center Bottom (Center Baseline)
E = Symbol Text Attribute "Destination"
Text Justification: Left Bottom (Left Baseline)
F = Cross Reference Attribute
Text Justification: Right Top
G = Wiring Diagram Symbol
H = Wiring Diagram Symbol Insertion Point

Add ability to place 3D Cable/Bus along a selected path.
User is able to place 3D Cable/Bus along a selected path.
- Draw a path using a Bspline Curve.
- Allow user to select Bspline Curves path to place 3D Cable/Bus symbol.



Add ability to allow user to set the variable assignment level as Workspace and Workset level.
User is able to set the variable assignment level as Workspace and Workset level.




Resolved issues in Promis.e CONNECT Edition Update 10, 10.10.00.53


230927 [Configuration Variables] Modify Catalog Paths -> Edit mode -> Append and Prepend doesn't work correctly
252074 Destination attribute position on cable diagrams
252280 [Forced Routing] enable Unforce for wire potential and potential group
253374 Project Publisher: the name of the packing list created by the Project Publisher is misspelled
307890 Memory Leak I Possible Memory leak while using different functions
311617 [Open Page] Open page reports error when add one LCM custom attribute that assigned to Wire property Name of Current
477193 [PW integration][Environment]Shows "Internal Error" when try to open read-only page from Project Manager
516510 [Navigation] user defined modes are missing from navigation
522420 [Wire Diagram][Terminal Symbol] terminal number attributes missing and not populating with correct values
527335 [PW Catalog Manager]Delete a category, it popups unexpected dialog.
535355 [Insert Symbol By Name] Fail to list catalogs added in Modify Catalog Paths with Edit mode Append/Prepend while Insert Symbol By Name
537759 [Network Workspace][Rename Project] Rename one network project that has been opened one page by another user will report error
538898 [Page Format Designer] It reports error when extract page format from the demo projects
548942 [Configuration Variables] The user is not able to select WorkSet files in Configuration variables in Managed WorkSpace with PW
570805 [Forced Routing] new function to allow user to unforce all connections in project
576971 [New Project] An error appears when create a project under path defined by Add a network location
577159 In correct terminal numbering on wire diagram
579263 [Create Symbol]Create a symbol without device id, and then insert it, copy it, the CPs are not correct.
579461 [Run Graphical Plan]It popups error dialog when place script for some special terminal in the DEMO project.
583176 [Grid/Snap Settings] Grid value in Design File settings not maintained if Enable Grid/Snap Lock option is unchecked in options
583548 [Project Manager] Page preview is not updating
587866 Symbol Graphics not Saved
596767 [Wire Link] Wire Link's symbol text attribute cannot work properly
597173 [Place Symbol Again] Error Message while using Place Symbol Again for Symbols without Device Tag/Installation / Location
597758 [Page Management][Copy Page] Copy multi pages from one project to another project will occur error
601962 [Update Project Database] Project Database cannot be updated using UI
613121 [Restore Project] The database is not compatible when we try to restore a project to a database in another server instead of the Default Project Database one.
613417 [Find-Replace Wire Property][Performance][PW] It takes about 4 min 50 sec to open the Find-Replace Wire Property dialog in large project
613682 [Terminal/Pin-Plug Manager]It should have a vertical stroll bar in the left side if there are many terminals.
613683 [Terminal/Pin-Plug Manager][PW][Performance]It is too slow to open Terminal/Pin-plug manager and click Apply button after add cable in the terminal/Pin-plug manager dialog.
613686 [Performance] [PW]Rename Project is slow.
613745 [Wire Manager][Performance] It takes more than an hour to make a force connection of wire in the Wire Manager in large project
613962 [Project Publisher][ProjectWise] It reports exception about access pltcfg file during publishing in PW project.
615579 [Copy&Move Objects][Copy page][Performance] It takes long time to copy multi objects and copy 3D Layout mode page
615624 [Delete Objects] [Performance][PW]Delete multi 3D objects will takes long time
616480 [Update Wiring Diagram][PW][Performance]It is slow to open update wiring diagram dialog.
617420 [Performance][PW] Modify Project is slow.
617723 [Rebuild Project Database] An error occurs when rebuild Project Database
617967 [Page Copy][Forced Routing] new option to all user to Maintain all Forced Connections during page copy
627531 [Backup] When a Project is backed up the Devinfo table details from Project DB are not present in the ECADProject.mdb file in the PRJ backup
631211 [Title Block Designer] Options to select the Seed file before creating / editing a Title Block
633768 [Page Copy][ProjectWise Integration] Illegal characters in path error appears for certain pages when user attempts to copy page
636805 [Raster Manager][ProjectWise Integration] When a Page containing Raster TIF image attached is closed and reopened in raster manager the TIF file cannot be seen
645218 [ProjectWise Integration][Configuration Variables] The user is facing the issue that if the Promise.cfg file contains the complete path for ProjectWise location of the configuration file
645434 [Project Options][Command Protection] - Exposing Parts Database 'Show Differences' to all User Roles
646144 [Catalog Manager] Getting UI error while rebuilding catalog
646416 [Configuration Variables][Workset] paths in dialog do not match paths in Promise.cfg
646418 [Configuration Variables][Workset] changing path value changes values in Workspace tab
652856 [Performance] Promis.e doesn't release memory after closing page.
660036 [Manage | Wiring Manager] Unforce Connection doesn’t work.
662092 [Restore Project] Error message during project restore due to bad data in LCM_GraphicalObject table in database
667972 [Memory leak]related with traversing selection sets.
680354 [Project Manager]Imported drawing is blank
680363 [Restore project] It cannot restore project from PW folder successfully for the second time
680390 [Create Project] Create project will report error when fill out an non existent Project database
681907 [Options][Display Formats][Cross Reference Format] Expression do not work due to variable translation.
681909 [UI] The size of some control is too small to display the whole content.
682053 [UI][Draw Ladder] The width of the dialog for setting the space between ladder lines is too small to display the whole caption.
682064 [EDC] The text of ‘Orphaned Balloons’ in the Error Checking dialog is not localized.
682342 [Report template designer] the attribute is not getting properly align
682517 [Wire Diagram][Wire Number Attributes] value not updated when user deletes wire number from schematic
684891 [ Symbol Cross Reference] Symbol cross reference visibility cannot be turned On/Off using Show Cross-Reference option
684942 [Part Part Number Attribute] When the user updates symbol text the Part Part Number attributes disappears
686241 [Memory Leak] Opening and closing results in extra processes running in Background
689888 [Wiring Manager]The default wire potential tree view display is not correct.
690542 [Wiring Manager]Force routing a connection, and clicking apply, then click OK button to close the wiring manager dialog, and reopen it again, the connection is not forced.
690553 [Wiring Manager]Change the capital “Want” and “Unforce” to lower case letters “want” and “unforce”.
693509 [Balloon Number Attribute] When the user updates symbol text the Balloon Number Attribute on NamePlate symbol disappears
693538 [Restore Project][PW Integration] When user tried to overwrite an existing project in a project wise path using restore project the database details are not overwritten
699964 [Copy Page] It reports error to copy page in some projects
701148 [Settings][User Preferences] enabling Compress File On Exit option causes application to Not Respond when user switched from one page to another
701492 [Wiring Manager]The potential group order should display like 1, 2, 3 … 11, should not like 1, 11, 2.
701507 [Create Symbol]Modify terminal number, it cannot display in the drawing.
701519 [Run Report]After force routing, the gauge and color cannot display in the wire list report.
702086 [Wiring Manager Unforce Connection]Sometimes the unforce connection cannot unforce all the connections in the potential.
702266 [Copy Page Maintain Forced Connections]Sometimes the forced connections display not correct in the copied pages.
703049 [Installer] Failed to install
703166 [Wiring Manager][Force Connection]Force several potential, and click apply button in the wiring manager dialog, some of them are not forced.
706960 [Wiring Manager][Add Device]Add device in the wiring manager dialog, it popup error dialog when clicking Apply button.
709306 [Open Page] DGN File name is changed to lower case when exported to PDF / Displayed
709942 [Wiring Manager][Add Device]Add device in the wiring manager dialog, close the wiring manager dialog, and reopen again, the wire number does not display in the wiring manager dialog.
711516 [Insert Cable/Bus] Placement by Path Method
713723 [Wiring Manager] An error occurs when opening the Wiring Manager in large Project
714568 [Device Usage Chart]Right click the Device Tag->click Device Usage Chart, it popups error dialog.
714586 [Wiring Manager][Performance] It takes about 3 min 09 sec to open the Wiring Manager dialog in large Project
716141 [Configuration Variables] Allow user to set the variable assignment level as Workspace and Workset level.
721679 [PW Integration] Crashing due to background process
726268 [Navigate][User Preferences] After set "Reset Pop-up menu" to Click in Preferences dialog, Navigate menu will list on the top of right click menu
726605 [Insert Macro] Insert Macro “STR_MACRO” will crash to the desktop
728751 [Copy Page] Equipment properties and wire tag in the copied page do not match the details from the source page
729740 [Project Builder] It reports exception during creating project to include option item.
730001 [Copy Objects] Copy objects will crash in the demo project
730701 [Project Builder] It reports Page Error after we click Create button.
731424 [RebuildProjectDatabase] An error occurs when run the Rebuild Project Database for user project
732820 [Device Usage] incorrect I/O Address and Function Text values displayed in device usage chart
732916 [PLC Address and Function Text] plc child address and function text values do not match parent values after using Device Usage to change child position
733161 Slow performance of Switch the page
733648 [Performance] [New Page] Open New Page dialog and the 1st time New Page is obviously slower than that in the last release.
734470 [Copy Page][Copy Circuit] An error occurs when copying a circuit on copied page
735620 [Navigate][PW]Navigate from a new created mode to another new created mode, and then navigate back, and navigate back again, the software will crash.
737052 [Thematic Manager] The created Thematic does not work after clicking the Apply button.
738784 [Configuration Variables]Fail to list Path in Create Catalog dialog for default WorSet, ANSI-IEEE Example and IEC Example
738891 [Memory Leak]The memory increased after running MVBA in MicroStation.
739425 [PW Explorer Plug in] An error occurs when copying a page with symbols/wires from PW Explorer
744028 [Copy page][Copy circuit] It reports error or crash when copy some circuit on the copied page
744288 [Wire Diagram]Create wiring diagram symbol, defined it Parent CPs, and add Wiring Number attributes, It pups error dialog when update the wiring diagram page with this symbol.
744955 [New Page]The page description cannot display in the drawing using default workspace.
748882 [Install] Fail to install due to failing to install Microsoft Visual Basic for Application 7.1
757020 It reports unexpected warning during launching software due to wrong Page Templates setting.
757096 Certify the latest ProjectWise Explorer release 10.00.03.453
760389 [Multi-DB]The software will get the wrong project database if we reference a page from another DB server.
763011 [Start Software] It failed to restart software
767868 [Symbol Create Wizard][Place Connection Points]Clicking Place button reports error.
771067 [Restore Project] Cannot restore some user projects
774887 ConfigurationManager.GetVariable() function returns NULL
774930 [PW]After office update, the cannot launch correctly when connecting with PW.
776249 [Modify Page]In the Modify Page dialog, deselect the toggle “Place title block in sheet model”, it should popup warning dialog.
776771 [Insert Objects] [Symbol Settings] Click Symbol Settings in Insert Symbol/ Macro dialog reports error
805305 Add the variable _USTN_CLOSE_DESIGN_CHANGINGFILES = 1 in promise.cfg
807028 [Shortest Distance Routing] [PE Project] The software will automatically be closed when executing the Shortest Distance Routing onuser project
809405 [Ribbon] Display commands and mode type show wrong
811317 Can't load Project Manager properly from drawing view after we click File > Close
823097 [Project Management] After draw a wire without targets, switch page with wire link reports error


Promis.e is an intelligent 2D/3D electrical system design application that delivers projects faster and with fewer errors than traditional CAD. Promis.e automates tedious drafting and employs an intelligent model that cross-references schematics, 2D layouts, 3D equipment models, and reports.

The primary focus of Promis.e is as a tool for drawing electrical schematics. This includes schematics for control, power, single lines, wire diagrams, terminal plans and even pneumatic and hydraulic control. It also has functionality for layout and physical design of the control enclosures. BUT It is not a simple drafting tool. Every wire, every connection, every component, and every piece of information about those items, and the different ways you may need to combine that information is maintained in a database. Connection information, cross referencing, technical specifications, ordering and pricing information, mounting layouts, and component labels and nameplates – all of this is encompassed by the software and provided in the form of drawings, lists, reports and databases. And all of this output, because it is computer-based, can be provided with greater speed, efficiency, and accuracy than was possible previously.

With Promis.e, the software is intelligent enough to take over some of these formerly-manual tasks. For example, when creating a schematic, the software can prompt a unique ID tag for each symbol so that user doesn't have to keep track of these assignments. The software also automatically cross references the location of related symbols in real time so that the user instantly knows where each ID is used. Wire numbers can be assigned automatically, again freeing the user from having to remember which numbers have been used. Should the user attempt to re-use an existing ID or wire number, error-checking functions immediately flag the situation.
The Promis.e software is able to provide this intelligence by grouping work into projects.

The application is used around the world to design industrial machine controls as well as electrical systems for process plants, mines, and rail signaling.

Rail Signaling Design with Bentley's Promis.e







Learn how to perform rail signaling design with Bentley's Promis.e.
Bentley Systems, Incorporated. is the global leader dedicated to providing architects, engineers, constructors, and owner-operators with comprehensive architecture and engineering software solutions for sustaining infrastructure. Founded in 1984, Bentley has nearly 3,000 colleagues in more than 45 countries, $500 million in annual revenues, and, since 2001, has invested more than $1 billion in research, development, and acquisitions.
Owner: Bentley Systems, Inc.
Product Name: Promis.e
Version: 2023 (23.00.00.046)
Supported Architectures: x64
Website Home Page : www.bentley.com
Languages Supported: english or 中文
System Requirements: Windows *
Size: 5.4 Gb


* System Requirements:




本部分内容设定了隐藏,需要回复后才能看到


软件下载问题联系sdbeta@qq.com
 
精品软件:百度搜闪电软件园  最新软件百度搜:闪电下载吧
有问题联系 sdbeta@qq.com
离线ganjun2001

发帖
2878
今日发帖
最后登录
2024-03-29
只看该作者 沙发  发表于: 2022-07-05 08:05:42
        
离线pancyu

发帖
894
今日发帖
最后登录
2024-01-22
只看该作者 板凳  发表于: 2022-07-05 08:19:19

发帖
1637
今日发帖
最后登录
2024-03-28
只看该作者 地板  发表于: 2022-07-05 08:50:36
谢谢LZ发现
离线mypwjclu

发帖
3404
今日发帖
最后登录
2024-03-28
只看该作者 地下室  发表于: 2022-07-05 13:47:08
感谢楼主分享!!!!!!!!
离线crskynet

发帖
1325
今日发帖
最后登录
2023-10-07
只看该作者 5 发表于: 2022-07-05 19:31:52
Promis.e CONNECT Edition Update 10
软件下载问题联系sdbeta@qq.com
 

发帖
1637
今日发帖
最后登录
2024-03-28
只看该作者 6 发表于: 2022-07-06 08:42:59
谢谢LZ发现吃
离线misswang

发帖
159
今日发帖
最后登录
2023-11-09
只看该作者 7 发表于: 2022-07-06 11:30:49
谢谢楼主分享,赞
离线zzl311

发帖
2055
今日发帖
最后登录
2024-03-19
只看该作者 8 发表于: 2022-07-17 22:38:00
谢谢分享。
离线panyue544

发帖
101
今日发帖
最后登录
2024-03-29
只看该作者 9 发表于: 2022-07-27 23:30:50
感谢楼主分享!!!!