论坛风格切换
正版合作和侵权请联系 sd173@foxmail.com
 
  • 帖子
  • 日志
  • 用户
  • 版块
  • 群组
帖子
购买邀请后未收到邀请联系sdbeta@qq.com
  • 11552阅读
  • 19回复

[行业软件]Siemens Simcenter FloEFD 2312.0.0 v6273 for CATIA V5 [复制链接]

上一主题 下一主题
离线pony8000
 

发帖
53221
今日发帖
最后登录
2024-03-28
只看楼主 倒序阅读 使用道具 楼主  发表于: 2021-05-14 08:42:32

Siemens Simcenter FloEFD 2312 for Catia V5 | 758.0 mb
Language: English, Deutsch, Français, 中文, 日本語, Русский

Siemens Digital Industries Software announces the latest release of its Simcenter FLOEFD software for Catia V5, a CAD-embedded computational fluid dynamics (CFD) tool. The latest version offers new modules and improvements that can improve accuracy and solve rates.

The new Electronics Cooling Center module in Simcenter FLOEFD combines existing best electronics-specific capabilities and integrates new ones from Simcenter Flotherm software inside the user-friendly CAD-embedded interface to enhance electronics cooling functionality. A second new module helps users create a compact Reduced Order Model (ROM) that solves at a faster rate, while still maintaining a high level of accuracy. Its package creator helps users create thermal models of electronics packages easily and quickly. The Power Electrification module can now simulate an electrical device as an electro-thermal compact model, which can save significant user and computational time.


Simcenter FLOEFD for CATIA V5 puts the power of computational fluid dynamics (CFD) simulation in the hands of the design engineer. An award-winning software, Simcenter FLOEFD works directly inside your CAD software. Now you can explore the full potential of designs quickly: understand the influence of changes in the geometry or boundary conditions on the results effortlessly, conduct fast and frequent what-if analysis, and generate insightful reports.

Realize the full potential of ideas quickly and save time and money by only progressing the design concepts with the most promise to the validation phase and when you need to use multiple CAD platforms on the same project or for legacy data, you can use Simcenter FLOEFD Flexx - a flexible licensing scheme enabling you to simulate your design in the CAD system of your choice.


Simcenter FLOEFD 2021.2.0 for CATIA V5 Release Notes - Date: July 2021
Simcenter FLOEFD for Catia V5 puts the power of computational fluid dynamics (CFD) simulation in the hands of the design engineer. An award-winning software, Simcenter FLOEFD works directly inside your CAD software. Now you can explore the full potential of designs quickly: understand the influence of changes in the geometry or boundary conditions on the results effortlessly, conduct fast and frequent what-if analysis, and generate insightful reports.

Realize the full potential of ideas quickly and save time and money by only progressing the design concepts with the most promise to the validation phase and when you need to use multiple CAD platforms on the same project or for legacy data, you can use Simcenter FLOEFD Flexx - a flexible licensing scheme enabling you to simulate your design in the CAD system of your choice.

New Features
The following new features are available in this release:

- Structural: Linear buckling. Linear buckling structural analysis is now possible.
- Structural: Modal frequency analysis of loaded model. Modal frequency analysis of a loaded model is now possible.
- Structural: Iterative algebraic solver. Iterative algebraic solver can be activated to solve memory intensive structural problems, for example very complex PCBs, to minimize memory requirements for a structural simulation. The iterative solver produces longer run times than the default “Direct” solver so the iterative solver is recommended to be used only if the available memory is insufficient for the simulation task.
- Electromagnetics: p-Adaption. Electromagnetic solver refinement of polynomial order. To increase accuracy for an electromagnetic analysis in local areas, you can activate automatic increasing of polynomial order (up to order three) in local areas.
- Electromagnetics: Dynamic Rectangle improvements. The dynamic rectangle can be easily oriented by setting coordinates and angles directly in the callout.
- Combustion: Three component mixture. Combustible mixtures can have three components, and the third component can be fuel or oxidizer.
- SmartPCB: HyperLynx report. You can now optionally enable a HyperLynx™software report to study the results of a co-simulation inside HyperLynx.
- Two Resistor: Power value is added to the name. By default two-resistors show the power in the name.
- Radiation Source: Coordinate system selection. You can now select a local coordinate system to simplify definition of coordinate dependent radiation sources(for diffusive sources).
- Radiation Source: Add Radiation Source into Parameter Editor. You can now change Radiation power and resolution of rays for multiple projects at once in the Parameter Editor.
- Thermal netlists: Intelligent naming in VHDL-AMS format. The point goal names are extended with the “extracted_tnetlist_” prefix for easier tracking in a system tool.
- Turbulence 2nd order approximation. The second order approximation is now used by default for convective terms of turbulence equations.
- Add from components: Move to active Project. A feature linked to assembly’s project from assembly subcomponent can now be easily moved to assembly’s project including breaking the original link using the new Move to Project command.
- Goals: Perforated Plate now has Pressure Drop and Loss coefficient goals. Pressure Drop and Hydraulic Loss Coefficient feature goals are added for perforated plate.
- Advanced control parameters. You can now define a project’s advanced control parameters in the Calculation Control Options dialog. Currently only one parameter is available: the parameter name is “TurbulenceOrder” and the parameter value can be “1” for the first order approximations and “2” for the second order.
- Streamlines with arrows. Streamlines can be seen with arrows if an MGC_STREAMDIR environment system variable is activated.
- Customize Feature improved. The license selection in the Customize Feature dialog was improved to avoid license conflicts if composite licenses (e.g. Electronics Cooling Center, Ultra) are available together with atomic licenses (e.g. Electronic Cooling Module). An option to use selected licenses only for the current session is added.
- Licensing: Add Package Creator to EDABridge. EDABridge module now has Simcenter FLOEFD Package Creator capability (the “efdpcreator” license is added to EDABridge product, MG273852FL).
- CATIA V5: Automatic disabling of cache. Enabling cache option in CATIA software V5 may cause some issues therefore Simcenter FLOEFD software for CATIA software V5 detects if the cache is activated and automatically disables it.
Simcenter FLoEFD is a front-loading CFD that is fully embedded in the most Popular CAD programs such a Siemens NX, PTC CREO, CATIA V5 and integrate with your CAD geometry. In this video we’ll be looking at a radiator which can be found in many automotive applications.







Siemens Digital Industries Software is driving transformation to enable a digital enterprise where engineering, manufacturing and electronics design meet tomorrow. The Xcelerator portfolio helps companies of all sizes create and leverage digital twins that provide organizations with new insights, opportunities and levels of automation to drive innovation.

Product: Siemens Simcenter FloEFD
Version: 2312 for CATIA V5
Supported Architectures: x64
Website Home Page : www.plm.automation.siemens.com
Language: multilanguage
System Requirements: PC *
Supported Operating Systems: *
Software Prerequisites: *
Size: 758.0 mb


本部分内容设定了隐藏,需要回复后才能看到





软件下载问题联系sdbeta@qq.com
 
精品软件:百度搜闪电软件园  最新软件百度搜:闪电下载吧
有问题联系 sdbeta@qq.com
离线zhuhongfeng

发帖
491
今日发帖
最后登录
2024-02-26
只看该作者 沙发  发表于: 2021-05-14 08:53:53
谢谢分享!!
离线ganjun2001

发帖
2877
今日发帖
最后登录
2024-03-28
只看该作者 板凳  发表于: 2021-05-14 09:30:08
        
离线scd

发帖
736
今日发帖
最后登录
2024-03-28
只看该作者 地板  发表于: 2021-05-14 09:47:02
感谢,试用!
离线lzldyst

发帖
188
今日发帖
最后登录
2024-03-28
只看该作者 地下室  发表于: 2021-07-01 07:56:51
very good!!
离线zhuhongfeng

发帖
491
今日发帖
最后登录
2024-02-26
只看该作者 5 发表于: 2021-07-01 09:04:53
谢谢分享!!
软件下载问题联系sdbeta@qq.com
 
离线asdihasi

发帖
80
今日发帖
最后登录
2023-09-21
只看该作者 6 发表于: 2021-07-21 13:22:27
kk
离线chongeryan

发帖
178
今日发帖
最后登录
2023-05-18
只看该作者 7 发表于: 2021-08-09 10:41:03
Simcenter FloEFD 2021.2.0
离线469508703

发帖
10
今日发帖
最后登录
2022-08-03
只看该作者 8 发表于: 2021-08-14 20:23:02
我也来看看随你
离线1208041822

发帖
20
今日发帖
最后登录
2023-02-28
只看该作者 9 发表于: 2021-10-18 17:03:43
好软件支持