<![CDATA[『软件下载交流』]]> <![CDATA[Synopsys PrimeSim vX-2025.06]]> Synopsys, Inc. has released PrimeSim vX-2025.06 is provides a unified workflow of next-generation simulation technologies to accelerate the design and signoff of hyper-converged designs.
Synopsys PrimeSim（作为 Synopsys PrimeSim Continuum 解决方案的核心组成部分）是新思科技推出的一款面向先进节点和高收敛（Hyper-converged）集成电路设计的统一高性能电路仿真与签核（Signoff）平台。其中 vX-2025（如 vX-2025.06 版本）代表了该系列在 2025 年发布的重大更新版本。

核心引擎与组成



PrimeSim HSPICE：业界黄金标准的精确电路仿真器，提供通过代工厂（Foundry）认证的 MOS 器件模型，广泛用于基础 IP、信号/电源完整性及模拟混合信号设计。

PrimeSim SPICE：支持 CPU/GPU 异构加速的高性能、大容量电路仿真引擎，在满足签核精度的同时大幅缩短运行时间。

PrimeSim Pro：面向现代 DRAM 和 Flash 闪存等大规模存储器及 CMOS 图像传感器的下一代 FastSPICE 架构。

PrimeSim XA：针对 SRAM、自定义数字电路及混合信号验证的领先 FastSPICE 引擎。

Synopsys PrimeSim circuit simulation solution provides a unified workflow of next-generation simulation technologies to accelerate the design and signoff of hyper-converged designs. The Synopsys PrimeWave design enviroment, a newly architected design verification environment, is integrated with the PrimeSim solution to deliver a seamless simulation experience around all PrimeSim simulation engines.
Synopsys, Inc. is the world leader in electronic design automation (EDA) software for semiconductor design. The company delivers technology-leading semiconductor design and verification platforms and IC manufacturing software products to the global electronics market, enabling the development and production of complex systems-on-chips (SoCs). Synopsys also provides intellectual property and design services to simplify the design process and accelerate time-to-market for its customers. Synopsys is headquartered in Mountain View, California and has offices in more than 60 locations throughout North America, Europe, Japan and Asia.
Сopyright holder \ Distributor: Synopsys Inc.
Product Name: PrimeSim
Version: vX-2025.06
Supported Architectures: x86_64
Website Home Page : http://www.synopsys.com
Languages Supported: english
System Requirements: Linux *
Size in archive: 5.9 Gb

(回复可见内容)
]]> <![CDATA[Synopsys SpyGlass vX-2025.06 SP1 Linux]]> Synopsys, Inc. has released SpyGlass vX-2025.06 SP1 is the industry standard for early design analysis with the most in-depth analysis at the RTL design phase.
Synopsys SpyGlass（现多演进为 VC SpyGlass 静态签核平台）是新思科技推出的一款行业领先的 RTL 级静态代码分析与验证工具。它能在芯片设计的早期阶段（寄存器传输级），快速发现设计中的结构、语法、时钟域和复位等深层次问题。

核心功能与特点
  • Lint 语法与规范检查：通过数千条预定义规则，检查 RTL 代码中的编码风格、可综合性隐患及潜在 Bug。

  • CDC 时钟域交叉检查：分析不同时钟域之间的信号传输，精准捕获亚稳态和数据丢失风险。

  • RDC 复位域交叉检查：验证异步复位和同步释放的设计正确性，防止芯片复位失败。

  • 高性能与高容量：支持数十亿门级的大型复杂 SoC 设计，大幅提升分析速度并降低误报率。

The SpyGlass platform provides designers with insight about their design, early in the process at RTL. It functions like an interactive guidance system for design engineers and managers, finding the fastest and least expensive path to implementation for complex SoCs.
Synopsys, Inc. is the world leader in electronic design automation (EDA) software for semiconductor design. The company delivers technology-leading semiconductor design and verification platforms and IC manufacturing software products to the global electronics market, enabling the development and production of complex systems-on-chips (SoCs). Synopsys also provides intellectual property and design services to simplify the design process and accelerate time-to-market for its customers. Synopsys is headquartered in Mountain View, California and has offices in more than 60 locations throughout North America, Europe, Japan and Asia.
Сopyright holder \ Distributor: Synopsys
Product Name: SpyGlass
Version: vX-2025.06 with Documentation
Supported Architectures: x86_64
Website Home Page : http://www.synopsys.com
Languages Supported: english
System Requirements: Linux *
Size in archive: 21.1 Gb

(回复可见内容)
]]> <![CDATA[12D Solutions 12d Model v15.0C1t]]> 12d Model 15是领先的测量、土木和水利工程软件！提供完整的功能和工具，帮助用户轻松进行快速准确的地形建模、测量以及土木工程的相关数据处理、地形构建、概念和细节设计，完整的模型，在各种大型项目中带来更多的帮助，完成复杂的设计任务，在项目的各个阶段，都将获得您需要的一切，您可以通过交互式方式在您的地形模型中添加合适的道路、渠道、平台等元素，从而生成合理的概念模型！


功能特色

1、12d®Model™基础产品是为民用和测量市场从头开始编写的。工作流程遵循传统的工程理念，使其易于学习和使用。
2、该基础包括许多字符串类型，以便进行精确的土木工程和测量建模。超级对齐字符串提供独立的水平和垂直几何图形，并在平面图和剖面图上交互式创建和编辑
3、该基地包括进行简单的道路和铁路设计、建造平台、拦河堤、蓄水池、水坝和运河的能力，而详细路线设计模块可用于更复杂的工作。
4、当对字符串或模板进行调整时，一个简单的重新计算工具会自动删除冗余信息，并用更新的几何图形和体积替换它。当需要进行许多试验来确定最终设计的最佳位置时，这尤其有用。
5、有三种主要类型的视图——平面图、剖面图和透视图——用户可以创建任意数量的视图来检查、构建和编辑信息。
6、所有视图都会自动链接，以便可以使用多个视图查看和操作数据。12d®Model™剖面视图扩展了剖面的概念，将被轮廓化的管柱两侧的走廊包括在内。道路中的任何字符串都可以显示在横断面图中。因此，配置文件字符串和实用程序之间的潜在冲突很容易检测到。
7、12d®Model™“超级串”为电话线、电缆、天然气管道和水管等公用设施的三维建模提供了一个简单的工具。超级字符串能够在每个字符串、顶点或字符串段上存储无限的属性。这提供了从项目到兼容信息系统存储、显示和协作元数据信息的能力，为BIM信息和ADAC信息管理提供了理想的基础。
8、创建、查看、查询和绘制模型（三角不规则网络）的轮廓，直至模块点基础。通过锡模型和其他设计特征切割和绘制截面。
9、12d®Model™Base的其他功能包括：
光栅和图像打印
完整的CAD工具和计划生成功能
完成现成和可定制的界面
点云工具
三维碰撞检测工具
创建3D模型的免下车电影
导出非专有格式，如3D pdf、KML（谷歌地球）、IFC和STL（3D打印机）
导入csv、2D pdf、xyz及其他格式


通过网盘分享的文件：12dModel
(出售内容)


]]> <![CDATA[TREPEDIA v5.0.8]]> TREPEDIA 是一个专业的楼梯设计/施工项目，主要面向楼梯建造者、金属加工公司、建筑师和制造商。


你输入建筑的基本尺寸，Trepedia会自动启动：
  • 计算升降、步数、楼梯角度等;
  • 创建二维绘图和三维模型;
  • 当你改变一个维度时，会重新计算整个楼梯;
  • 将设计与适用标准如DIN 18065及工业楼梯的DIN EN ISO 14122-3进行核对;
  • 生成生产图纸;
  • 导出DXF/DWG用于CAD/CNC，导出STEP/IGE用于3D，IFC用于BIM。


它支持多种配置：直梯、四分之一转楼梯、Z形楼梯、螺旋楼梯和中央横梁楼梯，以及不同的纵梁/车厢结构。
]]> <![CDATA[Synopsys IC Validator vX-2025.06 Linux]]> Synopsys, Inc. , the world leader in semiconductor design software, is pleased to announce the availability of IC Validator vX-2025.06 is a signoff physical verification solution that improves productivity for customers at all process nodes i.e., from mature to advanced.
IC Validator physical verification is a comprehensive and high-

performance signoff solution that improves productivity for customers at all process nodes, from mature to advanced. IC Validator offers the industry’s best distributed processing scalability to over 4,000 CPU cores. The tool’s performance and scalability enabled some of the industry’s largest reticle limit chips with billions of transistors, same-day design rule checking (DRC), layout versus schematic (LVS), and fill turnaround time. IC Validator is seamlessly integrated with the Synopsys Fusion Compiler RTL-to-GDSII solution and IC Compiler II place and route system in the Fusion Design Platform. This integrated fusion technology accelerates design closure for manufacturing by enabling independent signoff-quality analysis and automatic repair within the implementation environment.
Synopsys IC Validator 是新思科技（Synopsys）推出的高性能签核（Signoff）物理验证解决方案。作为 X-2025（vX-2025）版本，该工具进一步强化了对台积电（TSMC）N2/N3P 等最先进工艺节点的认证支持，并借助业界领先的分布式并行架构与 AI/机器学习技术，大幅缩短超大规模芯片从设计到交付（Tape-out）的物理验证周期。
一、 核心功能与技术特性
1. 全面物理验证：
– 支持完整的设计规则检查 (DRC)、版图与电路图一致性检查 (LVS)。
– 提供可制造性设计 (DFM) 验证、可编程电气规则检查 (PERC)
– 具备创新的时序驱动金属填挖（Dummy Fill）技术。
2. 超强分布式并行扩展（Distributed Processing）：
– 支持在云端或本地服务器上将作业无缝分配到 4,000 个以上的 CPU 内核。
– 具备近乎线性的扩展能力，使得数十亿晶体管的超大芯片能在一天内（Overnight）完成签核验证。
3. In-Design 融合技术（Live DRC & ADR）：
– 与 Fusion Compiler 和 IC Compiler II 布局布线系统实现原生深度整合。
– 物理设计阶段可直接在内存中调用 Live DRC，实现自动设计修复（ADR）。
– 避免了传统流程中反复导入/导出海量 GDSII/OASIS 数据带来的时间浪费。
4. 尖端工艺与新架构支持：
– 全面支持 FinFET、环绕栅极（GAA/NanoSheet）工艺。
– 原生支持硅光子学（Silicon Photonics）验证及 3D-IC/多裸晶（Multi-die）系统的异构集成物理验证。
5. Explorer 极速验证模式：
– 内置 Explorer DRC 与 Explorer LVS 创新技术。
– 在 SoC 顶层集成阶段提供高达 30 倍的 LVS 提速，并降低 30 倍的内存占用。
——————————————————————————–
二、 核心优势对比
——————————————————————————–
* 验证周期：将传统先进工艺下耗时数天的 DRC/LVS 验证缩短至数小时或隔夜完成。
* 收敛效率：通过 In-Design ADR 与时序感知填挖，在布线阶段即时解决违规，避免后期破坏时序。


* 计算成本：引入弹性 CPU 管理技术，大幅降低硬件要求与内存占用，可节省高达 40% 的总拥有成本（TCO）。
Learn how to run Design Rule Checks (DRC) using IC Validator.
Synopsys, Inc. is the world leader in electronic design automation (EDA) software for semiconductor design. The company delivers technology-leading semiconductor design and verification platforms and IC manufacturing software products to the global electronics market, enabling the development and production of complex systems-on-chips (SoCs). Synopsys also provides intellectual property and design services to simplify the design process and accelerate time-to-market for its customers. Synopsys is headquartered in Mountain View, California and has offices in more than 60 locations throughout North America, Europe, Japan and Asia.
Сopyright holder \ Distributor: Synopsys, Inc.
Product Name: IC Validator
Version: vX-2025.06
Supported Architectures: x86_64
Website Home Page : http://www.synopsys.com
Languages Supported: english
System Requirements: Linux *
Size in archive: 13.7 Gb

(出售内容)
]]> <![CDATA[Exposure Software Blow Up 3.1.8 (x64)]]> Blow Up keeps photos crystal clear during enlargement. Especially in large prints hung on a wall, the difference between Blow Up and Photoshop is astounding. Version 3 makes pictures even sharper without computer artifacts. If you understand Photoshop’s resize command then you already know how to use Blow Up. Our large library of standard paper sizes makes it even easier. With Lightroom and CMYK support, Blow Up fits into a professional workflow.

Image Quality
In Blow Up 3 we found ways to make edges even sharper without introducing computery artifacts. The images below show the difference between Blow Up 3 and the traditional bicubic photo resizer used by Photoshop and other image editors.

Simplicity
Blow Up’s interface is deceptively simple. Just set your paper size as you would in Photoshop and optionally set a crop region. In version 3 we kept all the rocket science under the hood.

Lightroom Support
Blow Up 3 has tight Lightroom integration that supports batch processing and does not require Photoshop. Visit our Lightroom page to learn the details.

Speed
Blow Up 3 runs faster on both Macintosh and Windows computers.

Huge Images
You can resize up to 300,000 pixels per side, the maximum Photoshop can handle. Of course, Photoshop would choke on a square image that big, but if you are making a billboard that Photoshop can handle, so can Blow Up!

CMYK
Blow Up can handle CMYK images used in offset printing and 16-bit/channel images used by professional photographers.

Presets
Blow Up has presets for common paper sizes, including photo papers and standard US, European, and Japanese sizes.

Output Sharpening
Just choose your paper type and Blow Up sharpens the right amount to compensate for ink diffusion.

Host Requirements:
Blow Up 3 is a plug-in and requires one of the following host applications:
Alien Skin Exposure X or newer
Adobe Photoshop CS6 or Adobe Photoshop CC 2015 or newer
Adobe Lightroom 6 or Adobe Lightroom CC 2015 or newer

System Requirements:
Microsoft Windows: Windows 7 64-bit or newer
An Intel Core 2 processor or compatible
A monitor with 1280×768 resolution or greater

Home Page - https://exposure.software/

(回复可见内容)

]]> <![CDATA[SGS Genesis 2026 v2.3.15]]> SGS Genesis 是 SGS 地质服务部门的一个专门地质项目，用于矿床的三维建模和矿产资源的计算。它历来起源于伽玛地质标程序（SectCAD、BlkCAD、PolyCAD、Geostat）。


实际上，这是一款属于地质建模+地质统计+资源估计类的软件，主要专注于采矿地质学。


功能：

  • 井数据的加载与验证;
  • 岩性、采样和分析工作;
  • 构建三维地质模型和地表;
  • 矿化域的创建;
  • 综合;
  • 变异函数的构造与分析;
  • 克里金及其他评估方法
  • 创建块模型;
  • 资源分类;
  • 质量保证/质量控制及统计分析;
  • 采石场和地下作业的优化;
  • 资源报告。


也就是说，典型流程大致如下：
→井→复合→地质域，→变速→块状模型→品位估算→资源分类→报告。







主要特点是程序试图将整个过程整合到一个相对简单的界面中。SGS现提供多个许可级别，从免费查看器到三级资源估计，支持区块模型、变异、坑优化、矿井优化和资源报告。


而且它不仅仅是“查看器”：Genesis实际上被SGS用于矿产资源估算，包括需要为NI 43-101准备材料的项目。例如，在已发布的技术报告中，Genesis被用于统计分析、区块建模和资源估计。

通过网盘分享的文件：Genesis

(出售内容)

]]>