Proteus将易用性与强大功能相结合，可帮助您以前所未有的方式设计，测试和布局专业PCB。Proteus Design Suite 8拥有近800种微控制器型号，可直接从原理图中获得仿真，是市场上最直观的专业PCB布局封装之一，也是标准配置的世界级形状自动布线器，为当今和未来的工程师提供完整的软件包。
PCB布局
Proteus PCB设计将Schematic Capture和PCB布局无缝结合，为专业PCB设计提供功能强大，集成且易于使用的工具套件。
可视设计师
Arduino的可视设计器将世界一流的Proteus VSM仿真与新的流程图引擎相结合，提供真正集成且直观的开发环境。
VSM仿真
Proteus设计套件完全独特，能够在混合模式SPICE电路仿真环境中共同模拟高级和低级微控制器代码。
The Labcenter Electronics product team is pleased to announce the availability of Proteus 8.17 SP2 is a proprietary software tool suite used primarily for electronic design automation.
What's new in Proteus Design Suite 8.17
- Push and Shove Route Editing: Route editing operations are now capable of moving other tracks and vias out of the way. This is a huge timesaver, whether you are nudging a via to make space or pushing tracks all the way to their design rule limit to tidy up the board.Push mode is now shared between placement and editing, with a single toggle (SHIFT+P) determining behaviour. When push mode is off route editing can still be design rule aware, giving you the ability to hug but not move other objects on the board
- Diff Pair Routing: The differential pair routing algorithms have been improved in a few places, but most notably with the automatic start and termination. These will now attempt to route through components that are blocking the terminating pads as well as better handle rotated component terminations.
- Route Command Centre (Upgraded): Route command centre remains the control hub for all placement and editing operations. Push mode can be toggled on or off and now applies equally to both placement and editing of routes.
- Finally, while not quite ready for the initial release work progresses well on our new simulation product, Proteus VSM for MicroPython. We're hopeful that this will see launch during the 8.17 Service Pack Cycle.
The Proteus Design Suite is a proprietary software tool suite used primarily for electronic design automation. It is a Windows application for schematic capture, Simulation, and Printed Circuit Board(PCB) layout design. It can be found in many configurations, depending on the size of designs being produced and the requirements for microcontroller simulation. All PCB Design products include an autorouter and basic mixed-mode SPICE simulation capabilities. The software is used mainly by electronic design engineers and technicians to create schematics and electronic prints for manufacturing printed circuit boards(PCBs) and also as a rapid prototyping tool for R&D. It is also found in Universities across the world, teaching electronics, embedded design, and PCB layout to students. It also has features that allow you to virtually simulate your IoT projects.
The 8.17 release is a significant point release introducing a new Push and Shove route editing mode. Building on the Push routing algorithms, users can now push tracks and vias out of the way during a route editing operation. This is fully design rule aware and works with both linear and curved cornering modes.
Proteus的新功能：
- 此版本是我们PCB开发计划中的重要版本，主要关注三个方面。
- 首先，我们为PCB上的自动长度匹配引入了全面的支持。配置公差和蛇形形状后，用户可以简单地选择相关轨迹，然后从上下文菜单中调用匹配命令。
- 我们还引入了一个更正式的层叠堆向导，可以指定物理PCB的构建，然后传递给晶圆厂。这允许用户专门定义板中使用的钻孔通道（钻孔范围），特别是对于多层板，这允许我们在轨道放置期间提供智能通孔选项。
最后，我们重新编写了设计资源管理器模块，以便：
- 系统范围内对Assembly Variants的支持，允许用户创建产品变体并指定该变体中各个零件的“拟合”或“未装配”状态。
- 对原理图进行更强大的搜索和过滤，以及更换属性。这使得它快速而简单，例如在设计中改变所有10nF电容器上的封装。
- “推 - 推手动路由”功能的进展仍然是今年年底进行beta测试的目标。
- 同时，在Proteus VSM方面，我们很高兴地宣布完成了流行的STM32 ARM Cortex-M3系列，以及PIC单片机系列中的几个新变种和几个新的嵌入式外设模型。
- 最后，我们在Visual Designer模块中增加了对流行的Arduino机器人乌龟模拟的支持。
RELEASE NOTE
Owner: Labcenter Electronics Ltd.
Product Name: Proteus
Version: Professional 8.17 SP2 (37159) *
Supported Architectures: x64
Website Home Page : www.labcenter.com
Languages Supported: english
System Requirements: Windows *
Size: 485.6 mb
购买后，将显示帖子中所有出售内容。
若发现会员采用欺骗的方法获取财富,请立刻举报,我们会对会员处以2-N倍的罚金,严重者封掉ID!
此段为出售的内容，购买后显示
微博帐号登录