BETA-CAE系统21.1 | 2.1 Gb
BETA CAE Systems announces the first bug-fix release of ANSA/EPILYSIS/META and KOMVOS v21.0.x series. Apart from fixes in the detected issues, this version also hosts noteworthy enhancements and implementations.Consistently trying to streamline emerging trends and needs in engineering simulation industry, BETA CAE Systems proudly presents the release of v21.0.0 of its software suite. BETA CAE Systems announces the release of the 22.1.7 of its software suite. This last version of the ANSA/EPILYSIS/META and KOMVOS 21.1.x series, hosts numerous fixes in recently detected issues. 22.1.7 release notesCommon issues resolvedCommunication with License Manager
A new option to "Save & Retry" for license has been added in the CONFIRMATION dialogue window that pops up in ANSA and META, when the communication with the license server is interrupted. In this way, the user will be able to first save the file and then retry re-acquire license.
Graphics
ANSA and META could potentially fail to launch on a unique display, while executing batch jobs in parallel via VirtualX.
Known issues resolved in ANSAConnections & Assembly
The calculation of skipped adhesive elements (Cut-off Adhesives) for spotweld and adhesive line realization would produce erroneous results.
Safety
Unexpected termination of the Seatbelt Tool would occur, when changing the Number of Shells during Seatbelt re-creation.
Scripting
The Node Ids would be erroneously renumbered and duplicated, when using the function base.AddToModelContainer(), because of the numbering rules applied on the Model Browser container of the Nodes.
Known issues resolved in EPILYSISSOL200
Unexpected termination would occur in optimization with frequency response, coupled with enforced motion.
In SOL200 runs, the CDAMP1/CDAMP3 elements would not be connected correctly with PDAMP properties. In addition, values from DVPREL entries would not be not passed.
Known issues resolved in METABETA Packager Installer
The Toolbars Packager can now handle function calls that use the "dotted" notation. The dots will be automatically replaced by double underscores, so that the respective functions are created without any issues.
Nastran
Unexpected termination could occur while reading curves from .h5 files, due to memory leak.
Pam-Crash
Results could not be loaded correctly while reading .erfh5 files.
Managing Curve Data
When reading Contribution analysis results without Total Curve, the corresponding plots were not populated correctly.
LS-DYNA: Curves would not be properly plotted from a binout file, when the same Id was available for different entity types of 'swforc'.
Total Panel contributions would not be not read correctly for NX-Nastran.
Subcases States were missing when reading Nastran .h5 SOL111 results with Stresses.
NVH Calculators & Modal Response
FS Coupling: Too many structural elements would be included in the FSI, when the fluid mesh penetrated the surrounding structure in a way that the free surface rested significantly outside the surrounding panels.
When two FLUID PIDs had common faces, the FSI calculation would occasionally take into account faces which were not part of the outer surface of the fluid.
Fixed inaccurate numerical transient response analysis results, in cases where rigid body modes contributed to the response.
Integrating Machine Learning in BETA products
One of the highlights of the new version is the integration of Machine Learning (ML) in BETA Software Products, specifically in KOMVOS through ANSA. It provides a powerful tool to engineers/designers in the early development stages of a vehicle, enabling what-If studies for CAD & CAE teams to examine the impact of certain design changes using ML practices.
From a closer perspective, KOMVOS v21.0.0 offers boosted user performance capabilities, providing handy features such as an advanced Search Filter for all entities, coupled with automated refresh of its GUI upon DM views update.
Making the most of Computed Tomography for further analyses
Promoting BETA Products interoperability, effortless update of material properties of an idealized volume mesh, based on a Computed Tomography (CT) scan, can directly take place through a brand new ANSA plugin, whereas effective stiffness of FE mesh captures the presence of cavities in castings or the varying density of bones.
BETA提供了 与工程师问题相关的产品组合，从个人用户到企业级，都可以加速性能和质量改进。 随着当今产品变得越来越复杂，具有更多变化和更高的性能要求，组织努力满足市场对质量的需求并提高其过程的有效性。在这些努力中，他们越来越多地采用工程仿真，使其成为产品设计和开发的中心点，以缩短上市时间，提高产品质量并更好地理解众多产品设计的行为。 工程仿真的新发展和新功能不仅有望解决现有的行业需求和瓶颈，而且还为新概念奠定了基础，这些新概念将加快产品设计和开发中当前流程的发展。但是，这样做时，这些新的解决方案和开发必须与当前的工程问题和要求相关，同时避免增加进一步的复杂性。 为了开发这样的解决方案，仿真软件提供商应该与客户保持一致，并与他们紧密合作，以用流行语来回答他们的需求。在这种理念下，通过与工程界的合作以及持续的对话，BETA提供了与工程师的问题相关的产品组合，从个人用户到企业级，都可以加速性能和质量改进。 KOMVOS和SPDRM的高级仿真数据和过程管理，ANSA的功能强大而强大的建模功能，新开发的求解器EPILYSIS的使用以及META的高性能后处理和可视化已成为仿真的可信赖核心最苛刻的行业。 新的软件产品进一步增强了工程仿真功能，其重点是将全球团队之间的协作提高到新水平，并从早期阶段简化产品设计。新的协作平台NEERE提供了所有典型的通信手段，并通过虚拟现实室进一步增强了团队合作能力，并使工程师能够在其模型上进行远程协作。OpDesign是另一个全新的产品，它通过一种整体的，以性能为导向的方法彻底改变了产品设计和开发过程。 BETA产品组合为工程师提供了一个平台，通过改变他们面对挑战的方式，可以进入模拟的新时代。因为毕竟，挑战是推动发展的动力。
BETA CAE Systems is a private engineering software company committed to the development of state of the art CAE software systems that meet the requirements of all simulation disciplines. The company’s products, the ANSA pre-processor/ EPILYSIS solver and META post-processor suite, and SPDRM, the simulation-process-data-and-resources manager, hold a worldwide leading position across a range of industries, including the automotive, railway vehicles, aerospace, motorsports, chemical processes engineering, energy, electronics, heavy machinery, power tools, and biomechanics. Product: BETA CAE SystemsVersion: 21.1Supported Architectures: x64Website Home Page : www.beta-cae.comLanguage: englishSystem Requirements: PC *Size: 1.7 Gb 购买后，将显示帖子中所有出售内容。
若发现会员采用欺骗的方法获取财富,请立刻举报,我们会对会员处以2-N倍的罚金,严重者封掉ID!
此段为出售的内容，购买后显示
微博帐号登录