3917阅读
1回复

[行业软件]Nikon Camera Control Pro 2.31.0 [复制链接]

上一主题下一主题查看指定楼层

离线小爱

UID: 601

黄金长老

发帖: 7046

今日发帖

最后登录: 2024-04-30

只看楼主倒序阅读使用道具楼主发表于: 2019-10-30 14:15:19

自助获取论坛邀请码

Nikon Camera Control Pro 2.31 Multilingual | 318 Mb

This software remotely controls most functions of Nikon digital SLRs from a computer that is connected via USB cable or through wired or wireless LAN using a wireless transmitter. Advanced functions of the new Nikon D3 and D300 such as Viewer for preview and selection of images prior to transfer to a computer, Liveview function and Picture Control System are supported. It also supports workflows of Nikon’s exclusive photofinishing software Capture NX (optional) and browser and viewer software ViewNX.

Most settings of Nikon digital SLRs, that are connected via USB cable, such as exposure mode, shutter speed and aperture can be controlled remotely from a computer. Wired or wireless LAN is also available when using a wireless transmitter.
In addition to direct transfer of images from a camera to a computer, all procedures from shooting to saving images are smoothly processed.
Enhanced viewer function enables thumbnail display of images stored in a computer.

Compatible with the new functions of the Nikon D3/D300
Images in a camera buffer can be confirmed with thumbnail or preview display on a computer prior to transferring, enabling deletion of unnecessary images. This remarkably increases efficiency.
Supporting the Liveview mode (Hand-held mode and Tripod mode) of the D3 and D300, it permits adjustment of focus point and shutter release while confirming the image on a computer. In Tripod mode, focal-plane contrast AF on a desired point within a specific area is possible.
It also supports Picture Control System of the cameras. Picture Control parameters can be selected and adjusted on a computer, and custom curves (tone compensation data) can be created and registered
51-point AF can be controlled and displayed.
Fine tuning of the new white balance is available.

Integration with other Nikon software
Support for ViewNX browser and viewer software
Support for Capture NX photo-finishing software

该软件可以通过通过USB电缆或通过无线传输器通过有线或无线局域网连接的计算机远程控制尼康数码单反相机的大多数功能。支持新的尼康D3和D300的高级功能，例如用于在传输到计算机之前预览和选择图像的查看器，实时取景功能和优化校准系统。它还支持尼康独家照相洗印软件Capture NX（可选）以及浏览器和查看器软件ViewNX的工作流程。

可以通过计算机远程控制通过USB电缆连接的尼康数码单反相机的大多数设置，例如曝光模式，快门速度和光圈。使用无线传输器时，也可以使用有线或无线局域网。
除了将图像从相机直接传输到计算机外，从拍摄到保存图像的所有过程都得到了顺利处理。
增强的查看器功能可以缩略图显示存储在计算机中的图像。
兼容尼康D3 / D300的新功能
传送之前，可以在计算机上通过缩略图或预览显示确认相机缓冲区中的图像，从而可以删除不需要的图像。这显着提高了效率。
支持D3和D300的实时取景模式（手持模式和三脚架模式），它允许在计算机上确认图像的同时调整对焦点和快门释放。在三脚架模式下，可以在特定区域内的所需点上进行焦平面对比度AF。
它还支持摄像机的优化校准系统。可以在计算机上选择和调整优化校准参数，并可以创建和注册自定义曲线（色调补偿数据）
可以控制和显示51点自动对焦。
可以对新的白平衡进行微调。
与其他尼康软件集成
支持ViewNX浏览器和查看器软件
支持Capture NX照相洗印软件Operating System: Windows 7, 8/8.1, 10

兼容的尼康数码单反相机

D3，D300	当与无线发射器WT-4一起使用时，支持有线或无线LAN。
D2系列（D2H，D2X，D2HS，D2XS）D1系列（D1，D1H，D1X	当与WT-2一起使用时，D2X / D2HS / D2XS支持无线局域网。 Windows Vista支持当前不可用Intel Mac：仅支持Mac OS 10.4.9
D200，D100，D80，D70系列（D70，D70S），D50，D40系列（D40，D40X）	与WT-3一起使用时，D200支持有线或无线LAN。