闪电联盟 - Powered by phpwind

离线小爱

UID: 601

黄金长老

发帖: 7045

今日发帖

最后登录: 2024-04-20

只看楼主倒序阅读使用道具楼主发表于: 2019-06-17 21:50:03

自助获取论坛邀请码

Altair announces the release of FluxMotor 2019.1.1, a dedicated platform focusing on the pre-design of electric rotating machines. Apart from fixes in the detected issues, this version also hosts noteworthy enhancements and implementations.

Altair FluxMotor 2019.1.1 Release Notes - Date: 14 May 2020

Altair FluxMotor 2019.1.1 is available with corrections and improvements. It can be applied as an update to an existing installation of FluxMotor 2019.1.

Fixed issues of FluxMotor 2019.1.1

Induction machines with skewed topologies - Motor Factory – Test Environment

- Very often, the results of computations may be wrong when a skewed topology is considered for the squirrel cage or for the slot (ref.: FXM-12398).

The visible signs of this problem were mainly the following ones:

. Anomalies on the shape of the generated curves versus slip (or speed) like torque-slip curve

for instance

. The results got with the test "Working point / Sine Wave / U, f, N" are not consistent with

those got with the test "Performance mapping / Sine Wave/ T(Slip)"

磁通电动机是Altair的HyperWorks CAE套件的一部分，该套件包括用于低频电磁和热仿真的领先软件Flux。该软件工具允许用户从标准或定制零件设计和创建机器，以及直观地添加绕组和材料以进行选择测试并比较机器容量。基于现代技术，独立平台可提供快速，准确的计算。必要时，考虑到更复杂的现象，与Altair Flux有限元软件连接可进行更高级的研究。
Here is the list of new major features:

- Improvement of internal processes of optimization
- Three new tests available with sine wave drive:
. Computation of a working point targeted with Current, Control angle and Speed (I,, N)
. Computation of a working point targeted with Torque and Speed (T, N)
. Computation of a working point targeted with current and voltage (I, U)
- First available test available with the Square wave drive:
. Computation of a working point targeted with a forced current (I-Forced) - Parameterized trapezoidal shape
- Macro function to build rotor parts (magnets) from the Flux2D environment sketcher (part built with the sketcher or import from a CAD file)
- New parts are available in Part Library

Website Home Page :www.altair.com

本部分内容设定了隐藏，需要回复后才能看到

关于激活

1. Install Altair FluxMotor 2019.0.0 Win64.

2. Overwrite original <AltairFluxMotor2019 program folder>
(by default C:\Program Files\Altair\2019\AltairFluxMotor2019) with cracked one

3. Enjoy

Cracked by TeAM SolidSQUAD-SSQ

Altair FluxMotor 2019.0.2 Release Notes - Date: 2 September 2019
Resolved Issues of FluxMotor 2019.0.2

Motor Factory –Test environment
There is a lack of robustness for tests in which a response surface is computed(ref.: FXM-12010). The concerned tests are Datasheet, Working point/Motor I,U or T,N, and the computation of Efficiency maps in motor or generator operating modes.✓This issue has been corrected
Motor Factory –Design and Export environments –Export toFlux 2D or to Flux Skew
The computation of the phase resistance is wrong when exporting models to Flux or Flux Skew. The reference temperature is not properly considered(ref.: FXM-11873).Note: There isthe same problem for the computation of end-ring resistivity or resistancefor induction machines with squirrel cage.✓This issue has been corrected

FluxMotor is part of Altair’s HyperWorks CAE Suite, which includes Flux the leading software for low frequency electromagnetic and thermal simulations. The software tool allows users to design and create machines from standard or customized parts, as well as to intuitively add windings and materials to run a selection of tests and compare machine capacity. Based on modern technology, the standalone platform offers fast and accurate computations. When necessary, connection with Altair Flux finite element software enables more advanced studies, taking into account more complex phenomenon.