闪电联盟 - Powered by phpwind

离线pony8000

UID: 125

IT资讯组

发帖: 53240

今日发帖

最后登录: 2024-04-25

只看楼主倒序阅读使用道具楼主发表于: 2024-03-28 07:45:39

自助获取论坛邀请码

Autodesk Fabrication ESTmep 2025 (x64) | 863.7 Mb

The Autodesk Fabrication products help extend Building Information Modeling (BIM) workflow to mechanical, electrical, and plumbing (MEP) specialty contractors for designing, estimating and fabricating ductwork, pipework, electrical containment and other mechanical systems used in buildings. These products let you use manufacturer-specific content to generate better estimates, create more accurate detailed models, and directly drive MEP fabrication. Autodesk Fabrication CADmep supports detailing and installation workflows for mechanical, electrical, and plumbing (MEP) contractors. It is typically used by detailers to create "fabrication intent" models of piping, plumbing, and or duct work systems. Models that originated from AutoCAD, AutoCAD MEP, Revit or Fabrication CADmep can be used as starting points for adding the data necessary to make the design intent models fabrication-ready.

Because CADmep is integrated with ACAD, ACAD’s extensive 3D modeling capabilities can be leveraged to create highly detailed, intelligent models that contain the type of information needed to control the estimating, prefabrication\detailing, construction and installation processes for building piping and sheet metal systems.

Autodesk Fabrication CAMduct is a powerful HVAC manufacturing and ductwork fabrication software appplication, as well as a production management tool, used to efficiently produce HVAC systems. CAMduct uses comprehensive libraries of 3D parametric fixtures and fittings to help you meet manufacturing requirements.
The Autodesk Fabrication products help extend Building Information Modeling (BIM) workflow to mechanical, electrical, and plumbing (MEP) specialty contractors for designing, estimating and fabricating ductwork, pipework, electrical containment and other mechanical systems used in buildings. These products let you use manufacturer-specific content to generate better estimates, create more accurate detailed models, and directly drive MEP fabrication.

Autodesk Fabrication CAMduct is a powerful HVAC manufacturing and ductwork fabrication software appplication, as well as a production management tool, used to efficiently produce HVAC systems. CAMduct uses comprehensive libraries of 3D parametric fixtures and fittings to help you meet manufacturing requirements.

CAMduct includes the following features:
-Added manufacturer content and patterns: Select from thousands of added imperial content items and pattern templates. For example, additional patterns templates, such as round ductboard, floor drains and cleanouts, vented crossovers, and plugs, are available.
-Material-specific nesting parameters: Users can set different nesting parameters for different materials, such as insulation, ductboard, and sheet metal, to help avoid nesting the job multiple times.
-Bar coding and QR coding: CAMduct supports bar codes and QR codes to add data-rich bar codes and QR codes to labels and worksheets.
-Database Export/Import: Use a single command for database export and import, as well as optional insulation specifications and sections.
-Shared content libraries and databases: All Autodesk Fabrication products share libraries and databases for more seamless estimating, detailing, fabrication, and installation workflow.
-Duct fabrication component library: Access an extensive library of 3D parametric rectangular, round, and oval ductwork components with their associated developments.
-Simple graphical interface: An easy-to-use graphical user interface (GUI) allows both novice and experienced software users to enter job data and edits.
-Sheet metal and linear nesting: Advanced nesting algorithms and options help deliver better material utilization.
-NC writing and machine support: With post processors built in to support a variety of machine types, CAMduct helps control your production line of any size.
-Advanced job costing tools: Estimate jobs based on a variety of project factors to better understand bottom line.
-Additional software tools: CAMduct comes with additional software tools, such as CAMduct Components, Tracker, and RemoteEntry that extend and optimize functionality within the Autodesk Fabrication software products.
The Autodesk Fabrication products help extend Building Information Modeling (BIM) workflow to mechanical, electrical, and plumbing (MEP) specialty contractors for designing, estimating and fabricating ductwork, pipework, electrical containment and other mechanical systems used in buildings. These products let you use manufacturer-specific content to generate better estimates, create more accurate detailed models, and directly drive MEP fabrication.

Autodesk Fabrication ESTmep is a cost estimation software tool that lets mechanical, electrical, and plumbing (MEP) contractors produce more accurate cost estimates for MEP building systems projects throughout the detailing, fabrication, and installation workflows.

ESTmep includes the following features:
-Added manufacturers content and patterns: Select from thousands of manufacturer's items and pattern templates, including 54 newly added imperial ranges.
-Enhanced Database Export/Import: Use a single command for database export and import, as well as optional insulation specifications and sections.
-Shared content libraries and databases: All Fabrication products share libraries and databases for more seamless estimating, detailing, fabrication, and installation workflow.
-Enhanced real-world content, price, and costs: Access a library of real content, pricing, and costing data for more accurate cost estimation and analysis.
-Model import for bid generation: Extend design intent models from Revit building design software*, Revit MEP BIM software for MEP, or AutoCAD MEP software into Fabrication ESTmep for more accurate, competitive bids.
-Accelerate underlay trace: Quickly develop competitive bids using underlays and Design Line technology.
-Adjustable cost estimates: Create more accurate cost estimates based on project and market variables.
-Built-in Harrison codes and prices: New and legacy imperial content contains Harrison codes and prices to support the production of more accurate bids.
-Track project variation: Record all Adds and Omits on a job to support traceability and promote accountability for changes. Analyze this data to make comparisons against the original estimate.
-Value engineering option tools: Perform value engineering on services more efficiently, and produce several cost/benefit options for your clients.
-Color-coded cost tool: Visually define the cost of duct and pipe with the color-coded Cost Analysis tool.

System requirements:
OS:Microsoft Windows 10 (anniversary edition) operating system. or higher
CPU:AMD Athlon™ 64 processor with SSE2 technology, AMD Opteron™ processor with SSE2 technology, Intel® Xeon® processor with Intel EM64T support and SSE2, or Intel Pentium 4 with Intel EM64T support and SSE2 technology
Memory:4 GB RAM or greater
Graphics:1,280 x 1,024 (1,600 x 1,050 or higher recommended) true color video display adapter 128 MB or greater with OpenGL-capable graphics card
Space:2 GB of free hard drive space for installation and data storage

Home Page - https://www.autodesk.com/

本部分内容设定了隐藏，需要回复后才能看到