论坛风格切换
关注抖音账号:闪电下载,私聊获取资源
 
  • 帖子
  • 日志
  • 用户
  • 版块
  • 群组
帖子
  • 1266阅读
  • 0回复

[行业软件]Altium Concord Pro 2021 v4.1.1.6 [复制链接]

上一主题 下一主题
离线pony8000
 

发帖
51981
电魂
994093
威望
136681
好评
0
信誉
3298
爱心
110
今日发帖
最后登录
2022-01-12
只看楼主 倒序阅读 使用道具 楼主  发表于: 2021-04-13 15:51:15

Altium Concord Pro 2021 version 4.1.1.6 | 2.0 Gb

The software developer Altium is pleased to announce the availability of Concord Pro 4.1.1 Build 6 is your single source for component data, real-time sourcing information, component traceability within designs, and collaboration with your mechanical design team - all within the Altium Designer unified environment.

Version 4.1.1 - Build: 6 Date: 22 November 2021

Major Features
13219 Added support for Part Choice propagation from Altium to PLM (as component attributes for all supported PLM, as AML for Arena and Aras).
13422 Added support for Aras PLM integration for component sync and workflow with PLM.
16977 The MCAD Collaboration service has been enhanced to store and provide information of accepted and rejected changes during MCAD collaboration.
PLM
9348 Improve component synchronization by ensuring that configuration change enforces trigger of full synchronization rather than incremental.
11933 Fixed issue where incremental component sync from PLM to Altium does not pull unreleased Arena items.
12256 Fixed issue where Agile component sync was limited to 10,000 components (for a component type).
12288 Optimized Windchill PartsLink component sync performance.
15340 Fixed issue where component synchronization fails for some non-US regional settings on Windchill server.
16122 Improved support for unit of measure attributes for Windchill classification attributes.
Infrastructure & Administration
16771 Fixed issue where installation hangs in highly secured environment (failed service start and IIS binding creation).
17162 Remove case sensitivity check for user name when logging.
17165 Fixed issue where "Mechatronic 3D Models" folder (required for ECAD MCAD collaboration) was not created during "installation without sample data".
17420 Fixed issue where backup tool fails in specific Windows OS/Updates.
Projects
14560 Fixed issue within Project History where commit date/timestamps are incorrectly presented for some OS regional settings on server machine.
17098 Fixed issue where action buttons in the Project view of the Explorer panel do not work.
17284 Added additional options for MCAD component model naming during ECAD to MCAD Collaboration.
A distinct on-site, server-based design solution, Altium Concord Pro works in harmony with Altium Designer to provide an elegant answer to the question of handling design data with secured integrity. Altium Concord Pro not only provides rock-solid, secure storage of data, but also enables re-release of data as distinctly separate revisions - essentially tracking design changes over time, without overwriting any previously released data. It also caters for the lifecycle of the data to be managed, allowing people that need to use the data to see, at-a-glance, what stage the data has reached in its 'life' and therefore what it can be safely used for.

Altium Concord Pro is used to store and manage components, domain models, schematic sheets of circuitry and design templates. Indeed, you can even create and manage your entire design projects directly within the Server, with the additional benefit of collaboration support, meaning an entire team can work concurrently on the same board design - even annotating the design with comments.

By furnishing a set of reusable design 'building blocks' within Altium Concord Pro, you can embark on fresh projects safe in the knowledge that each model, component, and higher-order design element has been ratified and approved for use, with no having to reinvent the wheel as it were. The Server becomes both the source and destination of design elements, with each new design utilizing elements released to, and managed through, the Server. And by designing only with elements from Altium Concord Pro, the integrity of those designs is inherently assured.

And Altium Concord Pro facilitates bi-directional design collaboration with various supported mechanical design platforms. This enables you to keep MCAD and ECAD design teams on the same page by sharing changes to board shape, component placement, and mounting holes, and intelligently link together 3D component bodies with your electrical component data - creating a unified component model that accurately reflects design intent from the respective domains.

Concord Pro Evaluation Video Series







Altium LLC. is a multinational software corporation headquartered in San Diego, California, that focuses on electronics design systems for 3D PCB design and embedded system development. Altium products are found everywhere from world leading electronic design teams to the grassroots electronic design community. Founded in 1985, Altium has offices worldwide, with US locations in San Diego, Boston and New York City, European locations in Karlsruhe, Amersfoort, Kiev, Munich, Markelo and Zug, and Asia Pacific locations in Shanghai, Tokyo and Sydney.

Product: Altium Concord Pro
Version: 2021 version 4.1.1 Build 6 with plug-ins *
Supported Architectures: x64
Website Home Page : www.altium.com
Languages Supported: english
System Requirements: PC **
Size: 2.0 Gb


* release info:


Altium Concord Pro 4.0.1 buld 34.exe

MCAD_plugins
AltiumCoDesignerCREO_2.3.0.22
AltiumCoDesignerFusion360_2.3.0.8
AltiumCoDesignerInventor_2.3.0.8
AltiumCoDesignerSOLIDWORKS_2.3.0.9

** System Requirements:


Altium Concord Pro can be installed on a PC running one of the following Operating Systems:

- Windows Server 2016 Standard Edition (64-bit)
- Windows Server 2012 R2 (64-bit)
- Windows 10 (64-bit)
- Windows 8.1 (64-bit)
- Windows 8 (64-bit)

Recommended System Requirements

The following are the recommended system requirements to install and run Altium Concord Pro. Note that these recommendations are for 5 concurrent users.

OS: Windows Server 2016 Standard Edition (64-bit)
RAM: 16GB+
Processor: Intel Xeon processor or equivalent (4 or more cores)
Disk space: 200GB

Minimum System Requirements

The following are the minimum system requirements to install and run Altium Concord Pro. Note that these recommendations are for 5 concurrent users.

OS: Windows Server 2012 R2 (64-bit)
RAM: 8GB+
Processor: Intel Core i3/i5 processor or equivalent (2 or more cores)
Disk space: 200GB

The following MCAD platforms and versions are currently supported:
- Dassault Systemes SOLIDWORKS - version 2018, 2019, 2020, 2021
- Autodesk Inventor Professional - version 2019, 2020, 2021
- PTC Creo Parametric - 4.x, 5.x, 6.x, 7.x
此帖售价 29 电魂,已有 0 人购买 [记录] [购买]
购买后,将显示帖子中所有出售内容。
若发现会员采用欺骗的方法获取财富,请立刻举报,我们会对会员处以2-N倍的罚金,严重者封掉ID!
此段为出售的内容,购买后显示






关注抖音账号:1995078858,私聊获取资源
 
精品软件:百度搜闪电软件园  最新软件百度搜:闪电下载吧
闪电下载吧