论坛风格切换
 
  • 帖子
  • 日志
  • 用户
  • 版块
  • 群组
帖子
正版合作和侵权请联系sd173@foxmail.com
发帖 回复
返回列表
更多
  • 4299阅读
  • 30回复

[行业软件]Siemens NX 1965 Build 2502 (NX 1953 Series) 授权激活 [复制链接]

上一主题 下一主题
<
在线pony8000
 

发帖
51326
电魂
727989
威望
136681
好评
0
信誉
3298
爱心
110
今日发帖
最后登录
2021-04-13
只看楼主 倒序阅读 使用道具 楼主  发表于: 2020-12-13 08:39:46

Siemens NX 1965 Build 2502(NX 1953 Series) | 13.8 Gb
Languages: English, 中文, Čeština, Español, Français, Deutsch, Italiano,
日本語, 한국어, Polski, Português, Русский

The Siemens Digital Industries Software development team is pleased to announce the availability of NX 1957 Build 1901(NX 1953 Series), the latest release of NX, which brings significant significant new and enhanced functionality in all areas of the product, as well as several new design tools, to help you work more productively and efficiently to build your 3D digital twin.

The Siemens Digital Industries Software development team is pleased to announce the availability of NX 1961 Build 2202 (NX 1953 Series), the latest release of NX, which brings significant significant new and enhanced functionality in all areas of the product, as well as several new design tools, to help you work more productively and efficiently to build your 3D digital twin.

b]Siemens NX 1961 Build 2202 (NX 1953 Series) - Date: February 2021


Fixed_Problem_Reports_1961

1961,8457378,Measure: result for angle is wrong,DESIGN,INFO_ANALYSIS,MEASURE
1961,8457647,Simplify Path with tolerance exceeded is refused (OK) without alert (WRONG),RSD_GENERAL,PATH,EDIT
1961,8457674,Simplify Path to be refused if fixed angle corners are used on end(s) of segment,RSD_GENERAL,PATH,SIMPLIFY
1961,8458584,"Get ""Attribute units are invalid (not known in this part)"" having mapped GA attr",SHIP_DESIGN,GENERAL_ARRANGE,ROOM_ATTR
1961,8459453,While using shortcut keys there is a lag in functionality,SYSENG,UI_TOOLS,MENU_BUTTONS
1961,8460891,An error occurs when executing the model setup command on SOL153,CAE,ADV_SIMULATION,CHK_MODEL_SETUP
1961,8462539,PMI Center Mark as own group in PMI Report,PMI,SEARCH_&_REPORT,UI
1961,8462573,Weld Preparation delivers wrong geometry on DetailDesign Parts,KDA,WELD_ASSISTANT,WELD_PREP
1961,8463790,Error handling of NXOpen.Validate.Validator class not working on invalid inputs,KDA,VALIDATION,JOURNAMATION
1961,8464121,Part Family add column asserted mass asserted center of mass,ASSEMBLIES,PART_FAMILIES,GENERAL
1961,8464206,Create Linear Path with Dynamic Axis and Slope value gives uncontrolled XC-YC Pt,SYSENG,UI_COMPONENTS,OTHER_BLOCK
1961,8464863,PMI Report - Tolerance band for PMI dimension,PMI,SEARCH_&_REPORT,CORE
1961,8466317,Cannot open Drawing in NX 1907 -> Replaces PR 9951168,DRAFTING,ANNOTATION,CENTERLINE
1961,8466715,Incorrect circular motion during CSE simulation,CAM,WORKPIECE,3D
1961,8566081,"Polygon layout option size: Inscribed/Circumscribed is wrong, and go by contraries",DESIGN,REUSABLE_BLOCKS,PATTERN_SERVICE
1961,8572521,Failed to update the view,DRAFTING,DIMENSION,LINEAR
1961,8572644,L10N:Wrong translation in a report of Mold Cooling Analysis,KDA,MOLDWIZARD,ALL
1961,9220482,"""Unable to reference face"" adopt from JT after transformation matrix change",SHIP_DESIGN,STEEL_FEATURES,PLATE
1961,9620710,"View Update in NX12 or later, error occurred when updating hidden line display",DRAFTING,DIMENSION,LINEAR
1961,9654913,Drawing view update error: caused by dimension,DRAFTING,DIMENSION,LINEAR
1961,9768459,3D Technical Data Package View Carousel Previews,TECH_DATA_PKG,PUBLISH,CORE
1961,9783108,Creation: Mesh quality report 'NOK',CAE,ADV_SIMULATION,FE_ASSY_VRTICAL
1961,9862481,Fatal error when publishing Work Instructions,CAM,WORK_INSTRUCTN,ALL
1961,9879066,Library File extension is shown wrongly when load the brd file,PRINTED_CIRCUIT,PCB_EXCHANGE,ALL
1961,9887418,"mom_pos(3),(4) come after 3 to 4 events",CAM,POSTPROCESS,ALL
1961,9899685,Fillet weld not published to Teamcenter when reordered in construction tree,KDA,WELD_ASSISTANT,FEATURE_PUBLISH
1961,9905083,GSO ST: Part of selected items are export to Excel,CAE,ADV_SIMULATION,FE_ASSY_VRTICAL
1961,9905233,Structure Welding with multiple Weld Preparation Feature,KDA,WELD_ASSISTANT,WELD_PREP
1961,9911228,Fatal error when generating documentation in work instruction operation,CAM,WORK_INSTRUCTN,ALL
1961,9912012,Incorrect Object for this operation when opening file,DRAFTING,ANNOTATION,CENTERLINE
1961,9913338,GSO: export the multi-instance PID merge,CAE,ADV_SIMULATION,FE_ASSY_VRTICAL
1961,9914482,Error Updating Face LBCs after Abstraction - Face ID Mapping from FEM to SIM,CAE,ADV_SIMULATION,BOUNDARY_COND
1961,9922327,Fatal Error Opening CAM Assy,CAM,PART_CORRUPTION,ALL
1961,9924620,Incorrect object for this operation while opening a drawing structure only,PMI,INHERIT_TO_DRAW,UPDATE
1961,9926189,Creation: Geometrical set translated incorrectly,CAE,ADV_SIMULATION,FE_ASSY_VRTICAL
1961,9930683,NXOpen::CAM::BoundarySetPlanarMill::SetPlaneType() is not working.,CAM,JOURNALING,ALL
1961,9931152,"Wrong translation in File-Open dialog ""Anzahl"" should be ""Number"" in german envi",NXMANAGER,FILE_OPEN,ALL
1961,9936731,Internal error when typing an expression value beginnin,DESIGN,EXPRESSION,ALL
1961,9937770,PR9904400 followup PDFBuilder issue,NXMANAGER,TRANSLATORS,INFRASTRUCTURE
1961,9941824,Components loading after unsuppression of sub assembly with Minimal Load,ASSEMBLIES,ASSEMBLY_MODEL,COMP_SUPPRESS
1961,9942231,Documentation - instruction sheets,CAM,WORK_INSTRUCTN,ALL
1961,9944019,Problem with part family refresh required attributes,ASSEMBLIES,PART_FAMILIES,GENERAL
1961,9945325,New sketcher warning NX12 pattern in sketch,DESIGN,FEATURE_MODEL,PATTERN_SKETCH
1961,9946123,Internal error move line in active sketch,DESIGN,SKETCHER,VTK_INTEGRATION
1961,9946154,Error occur in selecting [Choose Line Style File] command in Japanese mode,SYSENG,DISPLAY,LINE_FONTS
1961,9946615,NX hangs up while loading LSA assy with preloaded sub structure,DESIGN,INFO_ANALYSIS,MASS_PROPERTIES
1961,9946892,checkmate_report.xlsm not compatible with 64 bit Excel,KDA,VALIDATION,UNKNOWN
1961,9947055,Bush settings are different when comparing dialog and information,CAE,MOTION,BUSHING
1961,9948557,Electrode Design disregards map template file since NX1926,KDA,ELECTRODE_DESGN,OTHERS
1961,9948859,Detail view fails to update,DRAFTING,DIMENSION,LINEAR
1961,9949628,Connected face finder unable to find the connected part faces,KDA,WELD_ASSISTANT,CONN_FACE_FIND
1961,9950193,GSOModif: failed to import prt file,CAE,ADV_SIMULATION,FE_ASSY_VRTICAL
1961,9951635,Response speed of hotkey is slow in NX1946,SYSENG,UI_TOOLS,MENU_BUTTONS
1961,9953128,Electrode BOM drops reference point precision and truncates REF attributes,KDA,ELECTRODE_DESGN,BOM
1961,9953736,Inconsistent behavior in Assign Weld PMI between versions,KDA,WELD_ASSISTANT,AUTO_WELD_SYMBL
1961,9955725,MFG: Plate Preparation failing,SHIP_DESIGN,MANUFACTURING,PLATE_PREP
1961,9955947,Structure Welding: Multi body/ edge selection needed,KDA,WELD_ASSISTANT,WELDING_JOINT
1961,9956179,German translation in the NX - Open dialog: Number is number,NXMANAGER,FILE_OPEN,ALL
1961,9956269,COLLAPSE trying to enter Advanced Studio task on HP ZBook G6 with AMD WX 3200,SYSENG,VISUALIZATION,ADVANCEDSTUDIO
1961,9956506,FAB PMI when disassociated gets display as if RETAINED ANNOTATION,KDA,WELD_ASSISTANT,AUTO_WELD_SYMBL
1961,9957330,"German Translation for ""Switch"" is not correct and has to be set to ""Schalter""",MECHATRONICS,SENSOR,COLLISION_SENSR
1961,9958114,Unable to create a mesh with layer as 1 using 'Mesh from boundary,CAE,ADV_SIMULATION,MESH_PRIMITIVES
1961,9958218,Incorrect mesh/mesh not created for mesh from boundary,CAE,ADV_SIMULATION,MESH_PRIMITIVES
1961,9958372,Tool Properties wrong translation,CAM,TOOLS,TURNING
1961,9958858,Create Fabrication only takes over the Path Segments / Stock no standard parts,ROUTING_GENERAL,PART,CREATE_FAB
1961,9959518,not identify the result of Vel w/ MSC.Nastran op2,CAE,ADV_SIMULATION,NVA_APL_POST
1961,9964852,Second Save Fails On Models With UGII_PV_TESS_CONFIG_FILE set,TRANSLATOR,OBJ,EXPORT
1961,9965250,"Second save with Save JT Data and UGII_PV_TESS_CONFIG_FILE set, fail.",TRANSLATOR,OBJ,EXPORT
1961,9965996,Copy parts between planes does not work properly,SHIP_DESIGN,STEEL_FEATURES,CPY_PRTS_BT_PLN
1961,9967967,Disable dialog memory for Tilt Angle and Shear Angle in End Cut - Addition Input,SHIP_DESIGN,STEEL_FEATURES,END_CUT
1961,9968662,"Relative Force result for Body driver seems not correct, not consistent",CAE,MOTION,GRAPHING
1961,9968848,Error opening -Inconsistent values given for array element replacement operation,CORRUPTED_PARTS,OPEN_PART,ALL
1961,9980160,Clone Welds Structure welding: Weldjoint ItemID is getting added the Joint Prefi,KDA,WELD_ASSISTANT,WELDING_JOINT
1961,9980372,Restructure of single sided weld joints not working,SHIP_DESIGN,MANUFACTURING,MFG_PREP
1961,9987768,Saving JT data on second and following part save throws error,TRANSLATOR,OBJ,EXPORT


Algorithmic Modeling
With NX Algorithmic Modeling, it is now possible to design and engineering complex product forms and features that can be saved as a template and easily reused in similar design workflows. This tool garners a lot of interest in auto, aero, energy and consumer. Any industry where you need to make complex, variationally patterned shapes will be greatly helped by this tool.

The new NX Algorithmic Modeling application allows designers and engineers to create complex designs previously only attainable through days of effort or advanced programming knowledge. Design algorithms can be easily constructed using a logic editor. Algorithms can be saved and reused by the broader design and engineering community.

Convergent Modeling
Convergent Modeling in NX features new updates this time around. The updates to the Convergent technologies increase the value of convergent generated geometry, via scan or CAE, for downstream use without reverse engineering. Convergent Bodies with Mixed Geometry lets convergent bodies be comprised of mesh and analytic faces together. Replace Face of Mesh is a new command that lets users easily replace portions of mesh with analytics geometry.

Create engineered structures using implicit methods that are not feasible using traditional CAD methods. Implicit Modeling is a new optional module for the creation of equation driven structures, and performing robust modeling operations on complex designs. Industries that will benefit most from Implicit Modeling include those who are in the Additive Manufacturing market: Aero, energy, medical, and auto.

Design for Additive Manufacturing
Quickly create strong designs that require less resources to construct than with traditional CAD methods. Increased engineering flexibility and speed in designing performance structures only possible through additive. Lattice Structures in this release show increased flexibility of engineered structures which leverages the power of NX CAD modeling for the design of the unit cell. Lattice Structures updates improve engineering productivity and quality. Better quality faceting, for a much cleaner result. Creation time for lattices are blindingly fast, with up to 93% creation time reduction.

Wrap Mesh is also a new command that aids in preparing STL/Mesh models for 3D Printing. Wrap Mesh wraps a volume of interest into a water tight mesh body. There are options to control mesh and gap sizing.

Model Based Definition
In Model Based Definition, creating annotations is traditionally a manual process. Imagine a solution that could address this challenge. NX will allow users who have already adopted MBD to be more productive and efficient. For users that haven’t adopted MBD, our MBD solution will act as a kickstart and an accelerator (it no longer takes too much time to add the data in, for example.) We are helping our users get over previously perceived roadblocks to MBD.

Model based definition offers enhancements that deliver 3 distinct values to you.

- Removing tedious processes
- Capturing business intelligence
- Insure the PMI is compliant with industry and company standards

Automated authoring of PMI introduces an artificial intelligence powered solution. You will find an interactive Logic Editor diagramming interface that supports building and executing rules used to author PMI. This automation speeds up and simplifies tedious manual work, even for users without experience in MBD.

Capturing business intelligence – not only doing it faster, but better. Gain better insight with richer data. Capture key characteristics inside the model with the latest updates: this not only is it faster its also more intelligent, allowing better and more insightful capturing of design data. Instead of having to manually find and enter these specs, it is automatically captured with NX MBD.

With this update, you won’t need to depend on individual experts to make sure you are compliant, so you can produce high quality parts in less time. With PMI Advisor for validation and guidance this will remove the dependency on highly trained GD&T experts.

Please take a look below for our MBD solution updates.



Assemblies
The upgrades to Assemblies in this release of NX is focused around Multi-User Design. NX supports a truly collaborative design environment by proactively notifying users of changes in their design context. Save time and eliminate rework by discovering changes as they occur and automatically update in your design context.

When you have multiple users in the same area, and they have each others parts open (not really an ownership of a file, but rather attribution), this keeps everyone on the same page and up-to-date on design changes. It lets you make sure you’re working on the latest version of your parts – which is great for large and interdisciplinary teams. This is not multiple users making changes simultaneously: you check out and check in, it’s not instantaneous. If another user has a part checked out, you’ll know.


Appearance Management
Appearance Management is a brand-new tool that will have significant application and benefit for many of our users in various industries. Whether you’re in automotive, consumer products, or any other industry, if you need to show product configuration variety, how can you do that easily?

Simple. With Appearance Management, now managed in Teamcenter. We’ve addressed the challenges around visually demonstrating product configuration variety so that you can easily display a range of looks. This new tool gives an edge to all users that need to be able to display their variety of products visually.


This is not limited to High End Rendering. This could and should support any Visual Twin representation. Appearance Management can be run in team center, as well as natively in NX.

PCB Exchange
Enhancements in this area are critical for users in the consumer electronics and high tech industry. This impacts you or your organization if they develop personal products, design electronics in devices (since devices are getting smaller), and those who seek to disrupt mature industry with innovations in electronics.

Flexible PCD updates offer our users a unique edge that no one else in the CAD space can match. We offer a complete set of tools for designing flexible circuits and cable components. As our users’ need to create innovative product designs increases, we’ve given electronics designers the ability to outpace the competition with new capabilities around Rigid-Flex Design, and flat solid enhancements.

We are also proud to announce Rigid Flex as part of our design solution. This industry first (we are the only one who offers this!) tool which allows for the creation, editing, and collaboration of Rigid-Flex designs in NX. This enables designers the ability to produce a fully flattened model for collaboration and downstream processes.

Mold, Tool, and Die
New tools within NX’s Mold, Tool, and Die solution enhance our users’ workflow experience by consolidating necessary applications and by leveraging automation to speed up manual processes. The solutions and enhancements in this area are especially impactful for designers in the automotive, industrial, consumer electronics, and medical spaces.


Users can rapidly simulate the thermal performance of an injection mold insert – previously, calculations took a long time, and users had to switch between CAD and CAE systems. Now it’s all in one system so the workflow is much faster, and helps designers stay focused by enabling them to stay in a single software environment. This is possible with Mold Cooling Analysis which is a very simple to use tool for designers.

Another big enhancement to Mold, Tool, and Die, Forming Analysis is a new tool that contributes to seamless workflow integration within NX, by helping perform both design and validation in (once again) a single software environment. With Forming analysis you can simulate forming and springback analysis.

Siemens NXSeries software is a flexible and powerful integrated solution that helps you deliver better products faster and more efficiently. NXSeries delivers the next generation of design, simulation, and manufacturing solutions that enable companies to realize the value of the digital twin.

Supporting every aspect of product development, from concept design through engineering and manufacturing, NXSeries gives you an integrated toolset that coordinates disciplines, preserves data integrity and design intent, and streamlines the entire process.

Siemens become the first major CAD/CAM/CAE vendor to deliver its software using Continuous Release methodology in January 2019. The new Continuous Release process significantly reduce the time between the proposal of a new enhancement, and its deployment to the end users. Customers will now have the opportunity to deploy the latest NXSeries productivity enhancements more quickly in their production environment which helps them become more productive when using NXSeries. In addition the Continuous Release will also reduce deployment costs for incremental updates.

Adopting a continuous release strategy also allows both Siemens and our customers to be more responsive to new ideas and trends in technology, once again allowing our customers to stay ahead of their competition.

What's New in NX CAM December 2020







Siemens Digital Industries is an innovation and technology leader in industrial automation and digitalization. In close cooperation with our partners and customers, we are the driving force for the digital transformation in the discrete and process industries.

Product: Siemens NXSeries
Version: 1957 Build 1901 (NX 1953 Series)
Supported Architectures: x64
Website Home Page : www.plm.automation.siemens.com
Language: multilanguage
System Requirements: PC *
Size: 13.8 Gb

Files save in the NX-1953 Series (NX-1953 and higher) cannot be opened in the NX-1026 Series and lower versions of the NX


* System Requirements:


Minimum Operating Systems
- Microsoft Windows 10 (64-bit) Pro and Enterprise editions

Windows 10
Windows 10 is the minimum supported release for NX 1926. The supported versions of Windows 10 are the Pro and Enterprise editions utilizing Semi-Annual Channel (SAC) updates.
Windows 7 and 8.1
Windows 7 has reached the end of life and mainstream support has ended. Windows 8.1 is still supported by Microsoft, but was rarely deployed. These two versions of Windows are no longer supported by NX 1926. Siemens Digital Industries Software has not performed testing on these version and cannot resolve any issues related to NX 1926 running on these operating systems. If NX 1926 is deployed on these versions of Windows, any issues will have to be replicated on Windows 10 before filing an incident report with GTAC.
Windows XP and Vista
Windows XP support from Microsoft has ended and Vista was rarely deployed so these two versions of Windows are not supported by NX 1926. Siemens PLM Software has not performed testing on these versions and cannot resolve any issues related to NX 1926 running on these operating systems. If NX 1926 is deployed on these versions of Windows, any issues will have to be replicated on Windows 10 before filing an incident report with GTAC

Recommended System Configuration:
- 64-bit Windows 10 operating system
- 4 GB RAM minimum, 8 GB or 16 GB RAM recommended
- True Color (32-bit) or 16 million colors (24-bit)
- Screen Resolution: 1280 x 1024 or higher, widescreen format
0. Uninstall ANY SIEMENS SPLM License Server if one is installed:

   - If the original SPLM License Server is installed, use "Programs and Features"
     to remove it

   - If SSQ SPLM License Server is installed, run as Administrator the "server_remove.bat"
     from the SPLM License Server folder

1. DO NOT install original SPLM License Server from NX setup media!!!

2. Install or update the SolidSQUAD Universal License Server

   If SolidSQUAD Universal License Server has never been installed
   on the computer:

     - unzip the "SolidSQUAD_License_Servers" folder from
     "Server\SSQ_UniversalLicenseServer_Core_<release-date>.zip" to any DRIVE ROOT
     folder X:\ (like C:\, D:\, E:\ etc), so the path will be:

    X:\SolidSQUAD_License_Servers

     - unzip the "Vendors" folder from
      "Server\SSQ_UniversalLicenseServer_Module_SiemensPLM_<release-date>.zip"
      to the "SolidSQUAD_License_Servers" folder

     - As administrator run "install_or_update.bat" from "SolidSQUAD_License_Servers"
       folder and wait until it completes

   -- OR --

   If SolidSQUAD Universal License Server is already installed,
   but the release-date of "Server\SSQ_UniversalLicenseServer_Core_<release-date>.zip"
   is newer than the installed one, update the server installation:

     - As administrator run "uninstall.bat" from "SolidSQUAD_License_Servers"
       folder and wait until it completes

     - unzip the "SolidSQUAD_License_Servers" folder from
     "Server\SSQ_UniversalLicenseServer_Core_<release-date>.zip" to any DRIVE ROOT
     folder X:\ (like C:\, D:\, E:\ etc), so the path will be:

    X:\SolidSQUAD_License_Servers

     - unzip the "Vendors" folder from
      "Server\SSQ_UniversalLicenseServer_Module_SiemensPLM_<release-date>.zip"
      to the "SolidSQUAD_License_Servers" folder

     - As administrator run "install_or_update.bat" from "SolidSQUAD_License_Servers"
       folder and wait until it completes

   -- OR --

   If the release-date of "Server\SSQ_UniversalLicenseServer_Core_<release-date>.zip" is
   not newer than the installed one but the release-date of
   "Server\SSQ_UniversalLicenseServer_Module_SiemensPLM_<release-date>.zip" is newer
   than the installed one, update SiemensPLM module only:

     - unzip the "Vendors" folder from
      "Server\SSQ_UniversalLicenseServer_Module_SiemensPLM_<release-date>.zip"
      to the "SolidSQUAD_License_Servers" folder

     - As administrator run "install_or_update.bat" from "SolidSQUAD_License_Servers"
       folder and wait until it completes

5. Install NX-1953.1700 Win64

   At setup when asked for license server port and name input: 27800@localhost

6. Overwrite original <NX-1953 program folder> (by default C:\Program Files\Siemens\NX1953 )
   with cracked one from folder "Client"

7. Reboot computer

8. Enjoy!


Cracked by TeAM SolidSQUAD-SSQ
此帖售价 29 电魂,已有 14 人购买 [记录] [购买]
购买后,将显示帖子中所有出售内容。
若发现会员采用欺骗的方法获取财富,请立刻举报,我们会对会员处以2-N倍的罚金,严重者封掉ID!
此段为出售的内容,购买后显示










软件下载有问题联系sdbeta@qq.com
 
精品软件:百度搜闪电软件园  最新软件百度搜:闪电下载吧
闪电下载吧
离线geatty

发帖
120
电魂
129
威望
3
好评
0
信誉
0
爱心
100
今日发帖
最后登录
2021-04-11
只看该作者 沙发  发表于: 2020-12-13 09:07:29
谢谢分享,很强大的工业设计软件
离线zhaoyafei19

发帖
410
电魂
502
威望
7
好评
0
信誉
0
爱心
100
今日发帖
最后登录
2021-04-13
只看该作者 板凳  发表于: 2020-12-13 09:46:56
很强大的工业设计软件
离线boy_one

发帖
11
电魂
30
威望
3
好评
0
信誉
0
爱心
100
今日发帖
最后登录
2020-12-14
只看该作者 地板  发表于: 2020-12-13 13:07:23
看看有谁需要的
离线tiger_hu2008

发帖
163
电魂
63
威望
3
好评
0
信誉
0
爱心
100
今日发帖
最后登录
2021-04-13
只看该作者 地下室  发表于: 2020-12-14 08:53:33
离线xueshanfeihu

发帖
306
电魂
134
威望
15
好评
0
信誉
0
爱心
100
今日发帖
最后登录
2021-04-12
只看该作者 5 发表于: 2020-12-14 09:06:38
很强大的工业设计软件
软件下载有问题联系sdbeta@qq.com
 
离线tangqianfeng

发帖
268
电魂
133
威望
3
好评
0
信誉
0
爱心
100
今日发帖
最后登录
2021-04-13
只看该作者 6 发表于: 2020-12-14 11:03:35
kkkkkkkkkkkkkkkkkkkkkkkk
离线cntup

发帖
740
电魂
269
威望
166
好评
0
信誉
0
爱心
100
今日发帖
最后登录
2021-04-13
只看该作者 7 发表于: 2020-12-15 08:21:33
NX的版本更新的太快了吧
离线keung168

发帖
27
电魂
142
威望
3
好评
0
信誉
0
爱心
100
今日发帖
最后登录
2021-04-12
只看该作者 8 发表于: 2020-12-15 10:51:07
谢谢楼主的分享,辛苦了。
离线zihuilu

发帖
31
电魂
119
威望
1
好评
0
信誉
0
爱心
100
今日发帖
最后登录
2021-03-19
只看该作者 9 发表于: 2020-12-16 08:54:24
好东西。。。。。